Wednesday, June 25, 2014

Configuring VPN Server and VPN Server to work with NPS RADIUS Server.

Step 1 - Start > Run type "rrasmgmt.msc"

Step 2 - Right click and Select as per below.

Step 3 - Select "Remote access (dial-up or VPN)

Step 4 - Check on "VPN"

Step 5 - Select as below to set your own IP Addresses.

 Step 6 - Create the IP Address range.

 Step 7 - Select "Yes" to set the VPN Server to work with a RADIUS server

 Step 8 - Type in the primary RADIUS server name (In this case it will be the NPS server) and create a shared secret.

Step 9 - Review and Finish the configuration.


No comments:

Post a Comment